About 0.1mm Thickness White Hot Melt Adhesive For Battery Tab
0.1mm Thickness White Hot Melt Adhesive For Battery Tab is a battery tab and interconnect material. NanoLithium supplies it for cell tabs and spot-welded battery pack connections. Full specifications are shown below, and bulk or custom quantities can be quoted on request. We ship from Canada to the USA, Europe, South Korea and worldwide.
Packing: 500M/Roll
This hot melt adhesive/sealant is a specific and necessary item for sealing tab (Nickel or Aluminum) in between aluminum-made lamination film (pouch cell case).
| Color | Milk-White |
| Thickness | 100 um |
| Width | 4mm, 5mm, 6mm, 7mm, 8mm,10mm, Customized width |
| Length | 500m for 1 roll |
| Material | Enhanced Sulfurized Polymer Resin Material (3 Layers Lamination) |
| Outside Layers (Both Sides)
Thermal Softening Index |
116ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
| Outside Layers
(Both Sides) Thermal Melting Index |
135ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
| Middle Layers (Both Sides)
Thermal Softening Index |
145ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
| Middle Layers (Both Sides)
Thermal Melting Index |
175ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
| Removal Strength from Tab | > 15N/15mm |
| Removal Strength from
Al Lamination Film (Cell Case) |
> 35N/15mm |
| Resistance to LiPF6 Solution (1:1:1) | No Change in the Solution @ 85ºC*24 Hours |
Reviews
There are no reviews yet.